Joint-Stock Company ELSIB

address: Russia, 630088, Novosibirsk, Sibiryakov-Gvardeitsev st., 56
Tel: +7(383-2) 421-162, 420-884, 426-254, 421-466
Fax: +7(383-2) 426-927

Products for export:

• AC turbogenerators of 25-500MW capacity, rotation speed is 3000 and 3600rpm for power generation at direct connecting to steam and gas turbines. The cooling systems: air, hydrogen, water and oil.
  
• Vertical-shaft synchronous generators of 5MW and higher capacity for power generation at connecting to the vertical-shaft hydroturbines of suspended and umbrella version.
  
• Asynchronous three-phase motors: 3.1. Series aoa4 (two pole) of 315-8000kW capacity, voltage of 6000V, 3000rpm for drive stationary pumps, compressors, injectors and other machines, applicable in power, petroleum and gas industries etc. 3.2. Series 2 AaO of 315-1600kW capacity, AaO of 1000- 3150kW, 2Aao and 2Aao of capacity from 400-800kW. Voltage - 6000V. Single- and double-speed capabilities of universal commercial version for actuating the draft-blow and coal hammer mills at power stations and smelters. Adapted to operate in dusty environment. 3.3. Series 2Auia1 and 4AuMa of 500-2500kW capacity, voltage 6000V, 3000rpm. - explosion-proof, intended for actuate various high-speed machines in explosion-hazardous zones and outdoor (under tent) or in rooms without heating. 3.4. Series ?ai2u and ?aieu of 315-450kW capacity, voltage 6000V. - explosion-proof, intended for exploitation in mines, hazardous for gas and dust and in explosion-hazardous zones under indoor sand outdoors conditions. 3.5 aaa of 1600kW capacity, voltage 6000V. is intended for actuating the main circulating water pumps at nuclear power stations. 3.6. Series ABKA of 1000-2000kW capacity, voltage 6000V. are intended for actuating condensate pumps at nuclear power stations. 3.7. Series AB? of 400, 500kW capacity, voltage 6000V. is intended for actuating pumps in the intermediate loop at nuclear cogeneration plants. 3.8 Series 4?au of 800 kW, capacity, ?au of 2500kW, ?aui of 4000kW, voltage 6000V with polyphase rotor, 3000 rpm for actuating coo-3 gas-turbine units, injectors, compressors, hydrolic pumps and other machines with the enhanced inertia moment or requiring special starting conditions.
  
• Single-phase frequency converters of series i??, ????, ??o of 250-1000kW capacity, voltage 6000V. for feeding the induction heating, smelting, tempering units and all other machines, employing high-frequency current, to feed asynchronous motors for electric bars on the moulding-fining machines for production of synthetic fibres.